York Fitness G510 Instruction Manual page 11

INSTRUCTION
Fit the PEC ARM ASSEMBLIES (17 & 18) into
the PEC ARM TOP SUPPORT (13) and tightly
secure using fixings (Bolts & washers) as detailed.
Insert the HANDLE PIVOT SHAFT (19) into the
bottom of the PEC ARM (L) (18) and secure
the shaft using the fixings.
Thread the PRESS HANDLE (21) onto
the HANDLE PIVOT SHAFT (19) via
FIXING BRACKET (20).
(Repeat same for opposite side)
PEC ARM
ASSEMBLY (L)
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
9
50
M10 x 38mm x 2mm
FLAT WASHER x
HANDLE
PIVOT SHAFT
33
M10 x 60mm HEX HEAD BOLT x
43
M10 x 20mm HEX HEAD BOLT x
49
M10 x 23mm x 2mm
FLAT WASHER x
2
2
2
48
M10 NYLON
2
LOCKNUT x
4
PEC ARM
ASSEMBLY (R)
FIXING
BRACKET
PRESS
HANDLE
YORK G510 / 09