Playback on the FS-4
Before playing back a recording, you must have first recorded some-
thing. Also, make sure both the video camera and the FS-4 are pow-
ered on and connected together with the FireWire cable.
NOTE: This feature may not be available on PAL cameras.
Step 1:
Set your video camera to "VCR" or "playback" mode.
Step 1:
Navigate to the clip you want to preview by using the
bottom Left and Right transport control keys.
Play Key
Step 2:
On the FS-4, press the Play key.
Step 3:
Press the Fast Forward or Fast Backward key as
required. Refer to "Quickstart" on page 3 for more
information on the function of these keys.
Using the FS-4 with a Computer
Once you have recorded FS-4 clips to a FireWire disk drive using
FireStore, you can use those clips in most computer based DV NLE
systems.
Traditionally, in order to get footage into an NLE system, it was neces-
sary to capture or digitize that footage utilizing a video capture card.
Using the FS-4 recorded clips, you can skip this capture stage by just
connecting the FS-4 to your computer with an OHCI compliant IEEE-
Transport Control
Keys
19