Message "Check Dispensing System [X]; Priming The Dispensing System - Miele PG 8527 Operating Instructions Manual

Adding liquid detergents and neutralizers
^ Then lift it up and out at the bottom.
^ Remove the container from the
washer-disinfector.
^ Unscrew the siphon tube and remove
it.
^ Fill the container with the required
product.
^ Insert the siphon tube into the
container opening and screw it into
place.
Once the containers have been filled,
the message clears from the display.
44
^ Place the container in the
washer-disinfector.
^ Insert, close and lock the service
flap.
Message "Check dispensing system
[X]"
The currently running program pauses.
^ Check the container(s) and
dispensing hoses indicated on the
display.
[x] Instead of an X, the number of the affected
dispensing system will appear.
^ Refill or replace the container(s)
shown in the display.
^ Use the appropriate service program
to prime the affected dispensing
system (clear it of air).
Containers and dispensing systems
that are not in use can be shut off, to
avoid fault messages in the display
(see the Programming Manual,
"Machine function / Query
container").

Priming the dispensing system

Whenever a container has been
allowed to completely empty, it must be
primed (cleared of air) after refilling.
^ Select the corresponding service
program, e. g.,
^ Press the h start button.
DOS1-FILL
.