Table of Contents
Advertisement
Filling the dis-
pensing system
Dispensing liquid process chemicals
Push the suction wand into the neck of the container and screw it
into place.
Place the container in the drawer.
The suction wand must be located on the lower side of the support.
Push the drawer into the machine.
Insert the service cover into the lower brackets of the machine and
press on it.
Lock the service cover.
Acknowledge the message
with the OK button.
Each time a container is filled or replaced, the
tem
function must be carried out to remove any air from the dis-
pensing system.
The function can only be carried out if there are no load carriers in
the wash cabinet.
A dispensing system must be filled when:
- The corresponding container has been filled or replaced with a new
one.
- The process chemicals have been changed.
A dispensing system can only be primed if there are no load carri-
ers in the wash cabinet.
System
Open the
Open the
Machine functions
Fill dispensing system
Open the
Press the button for the corresponding dispensing system, e.g.,
DOS 1
.
The dispensing system will be filled.
Fill container for dispensing system "x"
menu.
option.
option.
Fill dispensing sys-
47
Advertisement
Table of Contents
