Change The Heating Type; Current Faults; Loading Packages - Miele PG 8527 Operating Instructions Manual

Context menu

Change the heating type

Current faults

Loading packages

26
In convertible washer-disinfectors, you can use the context
menu to change the heating type - e. g. from electric to steam
heating.
^ Select the menu item
activate.
^ Change the heating type as desired, e. g., to
Steam+electric
The new heating type is saved.
^ To leave the context menu, use+C.
In operating level D the current fault messages can be read
under this menu item.
^ Select the menu item and confirm using OK.
The current fault messages are displayed.
^ Use OK to scroll through the fault messages.
^ To leave the context menu, use+C.
If a barcode scanner is connected to the washer-disinfector
and load scan is activated, loading packages can be created
with this menu item in the Context menu.
All stages in connection with the barcode scanner are
described in the "Barcode scanner" section.
Steam/Electric
, then confirm the selection with OK.
, then use OK to