Automatic Mobile Unit Recognition - Miele PG 8527 Operating Instructions Manual

The automatic mobile unit recognition
feature assigns a program place to a
mobile unit. For this to work, the mobile
units must be coded with a magnetic
strip (with a bit combination).
In operating level C, each coded
mobile unit is assigned to the
corresponding program place.
When a coded unit is inserted into the
machine and the washer-disinfector
door closes, the automatic mobile unit
recognition selects the assigned
program.
See "Mobile unit coding" in the
washer-disinfector Programming
Manual for information on how to
code a mobile unit and assign
programs.

Automatic mobile unit recognition

,
or pieces are stuck to the magnetic
strip or its underside.
Attached metallic objects can cause
the coding to be misread or be
unreadable.
Mobile units with side coupling are
coded with tracks that have Bit 6 set
to I.
Mobile units without side coupling
must be coded with tracks that do
NOT contain Bit 6.
The magnetic strips in
washer-disinfectors PG 8527 /
PG 8528 must contain black
magnets.
Make sure that no metallic parts
27