Check Dispensing System [X]; Venting The Dispensing System - Miele G 7825 Operating Instructions Manual

Dispensing liquid chemical agents
40
Push the siphon tube into the neck of the container and screw it

into place.
When the container has been refilled, the error message will go out in
the display.
Place the container in the washer-disinfector.

Close the service panel.


Check dispensing system [X]

The current programme has been interrupted.
Check the container(s) and dispensing pipework shown in the dis-

play.
[X] The number of the relevant container will appear in place of the X.
Refill the container or replace it with a full one.

Vent the dispensing pipework of the system concerned using the

appropriate service programme.
If a container is not being used, the level query for the unused dis-
pensing system can be turned off to avoid the error message (see
"Machine functions, container query..." in the Programming Manual
supplied with the washer-disinfector).

Venting the dispensing system

A dispensing system which has run completely dry will need to be
vented after the container has been refilled.
Select the service programme required, e.g. DOS1-FILL.

Press the Start button 
