Security Settings
The Security Setting page allows you to configure the security management features on the router such as Packet filters and MAC Control.
Click on any of the menu items on the left to access the associated settings.
Security Settings > Packet Filters
The Packet Filter enables you to control what packets are allowed to pass through the router. There are two types of packet filter, the
"Outbound Packet Filter" which applies to all outbound packets and the "Inbound Packet Filter" which only applies to packets that are
destined for a Virtual Server or DMZ host only.
To enable an Outbound Filter, please make sure to tick the Enable tick box on the top of the page. There are two type of filtering policies:
1.
Allow all data through the routerexcept data that matches the specified rules.
2.
Deny all data through the router except data that matches the specified rules.
For each direction, you can specify up to 48 rules. For each rule you will need to define the following:
•
Source IP address
•
Source port
•
Destination IP address
•
Destination port
•
Protocol: TCP or UDP or both.
•
Use Schedule Rule#
3G Wireless N150 Mini Router m1-User Guide
28
YMLM1WN
www.netcomm.com.au