Grandstream Networks GXV3500 User Manual page 81

14. Why the IP address of the device NOT reset when clicking the "Restore" button?
The GXV3500 could be installed in areas that are not easy to access. For example, it could
be installed on the roof of a building or the ceiling of an office. This makes it difficult to
reinstall the device, therefore the "Restore" function will not clear the IP address.
15. Why can't the live video stream be viewed using a mobile phone or GSurf_Pro
after changing the HTTP Port of the device?
Make sure that the RTSP port of the device is set to 2000 plus the HTTP Port number. For
example, if the HTTP port is 88, then the RTSP port of the device that you configured on
GSurf_Pro or mobile phone should be 2088.
16. Port forwarding
Two ports must be forwarded on your router to watch video from a GXV3500 that is located
on a private network from a PC in a public network. The web port (HTTP) and the RTSP
port. Please make note that the RTSP port number changes according to the web port. If the
web port is 80, then the RTSP port is 554. If the web port is not 80, then the RTSP port
equals the web port +2000. For example, if the web port is 88, then the RTSP port will be
2088.
17. What is the "Pin Out" for the 3.5mm AV cable used in GXV3500?
st
The "Pin Out" layout for the supplied 3.5mm AV cable used in GXV3500 is the 1 one (highlight
in Blue) in below table.
Basically: 1: Ground; 2: Video (Yellow); 3: Audio Right (Red); 4: Audio Left (White).
Same as the AV cable used in Apple iBook.
Grandstream Networks, Inc. GXV3500 User Manual Page 81 of 82
Firmware Version 1.0.1.94 Last Updated: 05/2016