FTP Settings Page (Upload Alarm)
This page allows user to configure FTP parameters to upload the alarm or video recording:
Figure 19: FTP Setting Page
Enable FTP:
FTP Server:
FTP Server Port:
User Name:
Password:
Path:
NOTE:
Click "Save" to save the FTP configuration information.
Click "Test" after configuration, if setting is correct, a test FTP operation will be performed and
"Test successful!" orange bar will display if the operation is successful, like below:
Grandstream Networks, Inc.
When checked will enable built-in FTP client.
IP or Domain name of FTP site or server
TCP port for FTP server, default port number 21
FTP server User ID
FTP server user password
Path in the server where upload files are stored or saved.
GXV3500 User Manual
Firmware Version 1.0.1.94
Page 46 of 82
Last Updated: 05/2016