Figure 24-2: Alarm Event Time - Grandstream Networks GXV3500 User Manual

 Email and FTP upload JPEG and Store it to SD drive:
Click "Save" to save the settings. Following bar will display if operation successful.
NOTE:
 Voice Alarm to SIP Phone: Application example: Intercom System, press button as Alarm_In, the
pre-programmed SIP number or peer IP device will be called. If the receiver is Grandstream Video
phone, the callee can use DTMF PIN code to operate and Open Door.
 MJPEG is NOT supported for this feature.
Alarm Event Time Schedule:
Click the "Alarm Event Time Schedule" will bring up following interface to allow user to configure the
Time Schedule for the Alarm_In to take action.
Figure 24-2: Alarm Event Time Schedule Configuration Page
NOTE:

User has to configure the "Alarm Event Time Schedule"; otherwise the Alarm In interface will not
work if there is no time schedule configured.
Grandstream Networks, Inc.
Email, FTP and Store to the SD card the configurable trigger moment
JPEG snapshots.
GXV3500 User Manual
Firmware Version 1.0.1.94
Page 54 of 82
Last Updated: 05/2016