Instructions For Local Firmware Upgrade Using Tftp Server; Configuration File Download - Grandstream Networks GXV3500 User Manual

Ip video encoder / decoder
Hide thumbs Also See for GXV3500:
Table of Contents

Advertisement

Instructions for local firmware upgrade using TFTP server:

1. Unzip the file and put all of them under the root directory of the TFTP server.
2. Load the TFTP server from the PC and make sure the device in the same LAN segment.
3. Please go to File -> Configure -> Security to change the TFTP server's default setting from
"Receive Only" to "Transmit Only" for the firmware upgrade.
4. Start the TFTP server.
5. In webGUI of IP camera, configure the Firmware Server Path with the IP address of the PC.
6. Update the change and reboot the unit
End users can also choose to download the free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server.

Configuration File Download

Grandstream SIP Device can be configured via Web Interface as well as via Configuration File through
TFTP or HTTP/HTTPS. "Config Server Path" is the TFTP or HTTP/HTTPS server path for configuration
file. It needs to be set to a valid URL, either in FQDN or IP address format. The "Config Server Path" can
be same or different from the "Firmware Server Path".
A configuration parameter is associated with each particular field in the web configuration page.
parameter consists of a Capital letter P and 1 to 3 (Could be extended to 4 in the future) digit numeric
numbers. i.e., P2 is associated with "Admin Password" in the ADVANCED SETTINGS page. For a
detailed parameter list, please refer to the corresponding firmware release configuration template.
When Grandstream Device boots up or reboots, it will issue request for configuration file named
"cfgxxxxxxxxxxxx.xml",
"cfg000b820102ab.xml". The configuration file name should be in lower cases.
NOTE:
 GXV3500 only support XML automatic provisioning.
 Grandstream recommends end-user use the Grandstream HTTP server:
Grandstream Networks, Inc.
where
"xxxxxxxxxxxx"
GXV3500 User Manual
Firmware Version 1.0.1.94
is
the
MAC
address
A
of
the
device,
i.e.,
Page 57 of 82
Last Updated: 05/2016

Advertisement

Table of Contents
loading

Table of Contents