Grandstream Networks GXV3500 User Manual page 43

 Restart:
 Restore:
 Upgrade via:
 Firmware Server Path:
 Config Server Path:
 XML Config File Password:
 Automatic Upgrade Interval (Minutes):
 Automatic Upgrade:
System Access
•
Disable Telnet:
•
Enable UPnP Discovery:
NOTE:
 Only XML based automatic provisioning is supported by GXV3500.
Grandstream Networks, Inc.
When clicked, the camera will reboot or restart (soft reboot).
When clicked, the camera will be reset to factory default, wiping out all
the configurations (except IP address)
Upgrade firmware via TFTP, HTTP or HTTPS
Server path holding the firmware
Server path holding the configuration file (auto provisioning)
Password for encrypt the XML based configuration file
Time interval for automatic upgrade, default 10080
Checked to enable automatic firmware upgrade and provisioning.
Check to disable Telnet to enhance security.
Used for UPnP automatic discovery of the device in related network
environment. Default enabled.
GXV3500 User Manual
Firmware Version 1.0.1.94
Page 43 of 82
Last Updated: 05/2016