Figure 39: Remote Alarm; Gxv3500 - Grandstream Networks GXV3500 User Manual

GXV3500 (Decode Mode) Side:
GXV3500 has to be running as Decode Mode when functioning as remote Alarm_Out of the peering IP
Camera. The configuration is as below:
nd
1) Input the 2 stream (H.264 Only, MJPEG NOT supported) as the RTSP URL, with correct
credentials, as shown below.
2) Only ONE stream (currently decoding stream) the Motion Detection can use the GXV3500 built-in
Alarm_Out interface if there are multiple RTSP URL configured in the GXV3500.
Figure 39: Remote Alarm_Out peering GXV3500 Configuration
NOTE:

GXV3500 is designed to work with analogue camera, with maximum decode resolution
704x576, this is why 2
setting will be:
rtsp://IPCamera:Port/4 (4 is 2
Grandstream Networks, Inc.
nd
stream decoding used as peering for remote Alarm_Out. The RSTP
nd
stream of GXV3672/GXV3674/GXV3610)
GXV3500 User Manual
Firmware Version 1.0.1.94
Page 76 of 82
Last Updated: 05/2016