11. Click Next>>.
Wireless 5GHz Basic Settings
This page is used to configure the parameters for wireless LAN
clients which may connect to your Access Point.
AP (Access Point)
Access Point is used to configure the parameters for wireless
LAN clients who may connect to your Access Point.
1. From the Band drop-down list, select a Band.
2. From the Mode drop-down list, select AP setting.
3. Enter SSID for example LevelOne 5G
4. From the Channel Width drop-down list, select a Channel
Width.
5. From the ControlSideband drop-down list, select a
ControlSideband.
6. From the Channel Number drop-down list, select a Channel
Number.
7. Click Next>>.
68