System Time
This page allows you to set the time settings of the WBR-6003/ WBR-6006.
There are three ways to set up the System Time of the WBR-6003/ WBR-6006.
1. Get Date and Time by NTP Protocol: Selected if you want to get the Date and Time from an
NTP server. A Time Server and time zone is required. Once entered, click Sync Now to sync
the time with the Time Server.
2. Set Date and Time using PC's Date and Time: Set the Date and Time using the settings
from your computer.
3. Set Date and Time manually: Selected if you want to Set Date and Time manually.
If required, set the Daylight Saving settings by selecting Enable and define the Start and End dates
for daylight savings periods.
47