Mld-Snooping Group-Limit; Mld-Snooping Group-Policy - HP A5120 EI Series Command Reference Manual

Hide thumbs Also See for A5120 EI Series:
Table of Contents

Advertisement

[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping general-query source-ip fe80:0:0:1::1

mld-snooping group-limit

Syntax
mld-snooping group-limit limit [ vlan vlan-list ]
undo mld-snooping group-limit [ vlan vlan-list ]
View
Layer 2 Ethernet interface view, Layer 2 aggregate interface view, port group view
Default level
2: System level
Parameters
limit: Specifies the maximum number of IPv6 multicast groups that a port can join. The value ranges from
1 to 1000.
vlan vlan-list: Specifies one or multiple VLANs. You can provide up to 10 VLAN lists. For each list, you
can specify an individual VLAN in the form of vlan-id, or a VLAN range in the form of start-vlan-id to end-
vlan-id, where the end VLAN ID must be greater than the start VLAN ID. The effective range of a VLAN ID
is 1 to 4094.
Description
Use the mld-snooping group-limit command to configure the maximum number of IPv6 multicast groups
that a port can join.
Use the undo mld-snooping group-limit command to restore the default.
The default setting is 1000.
If you do not specify any VLAN when using this command in Layer 2 Ethernet interface view or Layer 2
aggregate interface view, the command takes effect in all VLANs that the interface belongs to. If you
specify a VLAN or multiple VLANs, the command takes effect in the specified VLANs that the interface
belongs to.
If you do not specify any VLAN when using this command in port group view, the command takes effect
on all the ports in this group. If you specify a VLAN or multiple VLANs, the command takes effect only on
those ports in this group that belong to the specified VLANs.
Examples
# Configure to allow up to 10 IPv6 multicast groups that GigabitEthernet 1/0/1 in VLAN 2 can join.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mld-snooping group-limit 10 vlan 2

mld-snooping group-policy

Syntax
mld-snooping group-policy acl6-number [ vlan vlan-list ]
undo mld-snooping group-policy [ vlan vlan-list ]
51

Advertisement

Table of Contents
loading

Table of Contents