This command works only on MLD snooping–enabled VLANs.
This command cannot remove the static group entries of MLD snooping groups.
Examples
# Remove the dynamic group entries of all MLD snooping groups.
<Sysname> reset mld-snooping group all
reset mld-snooping statistics
Syntax
reset mld-snooping statistics
View
User view
Default level
2: System level
Parameters
None
Description
Use the reset mld-snooping statistics command to clear the statistics information of MLD messages
learned through MLD snooping.
Examples
# Clear the statistics information of all kinds of MLD messages learned through MLD snooping.
<Sysname> reset mld-snooping statistics
router-aging-time (MLD snooping view)
Syntax
router-aging-time interval
undo router-aging-time
View
MLD snooping view
Default level
2: System level
Parameters
interval: Specifies an aging time for dynamic router ports in seconds. The value range is 1 to 1000.
Description
Use the router-aging-time command to configure the aging time for dynamic router ports globally.
Use the undo router-aging-time command to restore the default.
By default, the dynamic router port aging time is 260 seconds.
This command works only on MLD snooping–enabled VLANs.
67