Performing Xp External Storage Operations - HP StorageWorks XP24000 User Manual

5 Performing XP External Storage Operations

This chapter describes setting the external volume using XP External Storage.
"Overview of Setting Operations" (page 61)
"Setting Port of External Storage System" (page 62)
"Setting Port Attribute for Local Storage System" (page 63)
"Mapping an External Volume Automatically" (page 63)
"Mapping an External Volume Manually" (page 64)
"Setting the Cross-subsystem Paths" (page 74)
"Checking the External Volume Details" (page 81)
"Turning On or Off the Storage System" (page 84)
"Disconnecting External Storage System or Disconnecting External Volume" (page 87)
"Checking Connection Status and Resuming External Volume Operation" (page 89)
"Stopping the Use of Paths to the External Volume (Disconnect Paths)" (page 90)
"Restoring the Paths to the External Volume (Check Paths)" (page 91)
"Changing the Cache Mode Setting of the External Volume" (page 91)
"Changing the Inflow Control Setting of the External Volume" (page 92)
"Changing the Port Setting of the External Storage System" (page 93)
"Editing Mapping Policy" (page 94)
"Deleting the External Volume Mapping (Delete Volume Command)" (page 95)
Overview of Setting Operations
The following flow chart illustrates XP External Storage setting operations, which make external
volumes usable from a host.
HP Confidential Overview of Setting Operations 61