Checking The External Volume Details - HP StorageWorks XP24000 User Manual

Take the following steps to delete the cross-subsystem path B and add the cross-subsystem
path D.
6. Execute the Disconnect Paths command on the cross-subsystem path B.
7. Disconnect the cable that the cross-subsystem path B uses, and connect the cable that the
cross-subsystem path D uses.
8. Cancel the configuration of the cross-subsystem path B, and add the cross-subsystem path D.
9. Click Apply to apply the settings of the cross-subsystem paths B and D.
10. Make sure the status of the cross-subsystem path D is Normal.

Checking the External Volume Details

You can check the details on the mapped external volume using the LDEV Information dialog box,
and the details on the mapping path using the Mapping Path Information dialog box.
To check the external volume details:
1. Start Remote Web Console, and open the Volume Operation window.
2. Click the path group in the Volume Operation tree.
3. Right-click the external volume that you want to check in the Volume Operation list.
4. Select one of the following commands in the pop-up menu.
LDEV information: Displays the LDEV Information dialog box (see
Dialog Box" (page
Mapping Path Information: Displays the Mapping Path Information dialog box (see
"Mapping Path Information Dialog Box" (page
5. Verify the details in the displayed dialog box.
6. Click Close to close the displayed dialog box and return to the Volume Operation window.
LDEV Information Dialog Box
The LDEV Information dialog box shows the information on the LDEVs created in the external
volumes. Each row displays one LDEV information.
Figure 35 LDEV Information Dialog Box
HP Confidential
81)).
"LDEV Information
82)).
Checking the External Volume Details 81