A Connecting External Storage Systems - HP StorageWorks XP24000 User Manual

A Connecting External Storage Systems

This appendix provides configuration information for connecting various external storage systems
to the HP XP24000/XP20000 storage systems.
AMS/WMS Storage System
System Parameters
Table 34 (page 129)
on the AMS and WMS storage systems. You can either specify or omit any other parameters.
When connecting an AMS or WMS storage system, use Remote Web Console Modular or Remote
Web Console Modular 2 to set the data transfer speed of the external port to a fixed value other
than Auto. Also, set the data transfer speed of the target port of the AMS or WMS storage system
to a fixed value according to the data transfer speed of the external port.
Table 34 System Parameters (AMS/WMS)
Window Names
Boot Options
System Parameter
Port Options
HP Confidential
explains whether to specify system parameters when making settings on ports
Parameters
Start Attribute
Single Mode
Dual Active Mode
Delay Planned Shutdown
Drive blocking mode
Vendor ID
Product ID
ROM Microcode Version
RAM Microcode Version
Option
Operation if the processor failure
occurs
WEB Title
Write and verify mode
Port Option
Parameter Settings
Specify this parameter when the TagmaStore
AMS storage system or TagmaStore WMS
storage system is in the one controller
configuration.
Specify this parameter when the TagmaStore
AMS storage system or TagmaStore WMS
storage system is in the two controller
configuration.
You can either specify or omit specifying this
parameter.
You can either specify or omit specifying this
parameter.
Keep the default parameter and do not change.
Keep the default parameter and do not change.
You can either specify or omit specifying this
parameter.
You can either specify or omit specifying this
parameter.
You can either specify or omit specifying this
parameter.
Specify this parameter to Reset of occurred.
You can either specify or omit specifying this
parameter.
Set this parameter to ON for AMS 1000, AMS
500, AMS 200, and WMS 100.
Set this parameter to OFF for AMS 2500, AMS
2300 and AMS 2100.
You can either specify or omit specifying this
parameter.
AMS/WMS Storage System 129