Mapping Path Information Dialog Box - HP StorageWorks XP24000 User Manual

External storage
Hide thumbs Also See for StorageWorks XP24000:
Table of Contents

Advertisement

The LDEV Information dialog box consists of:
List
LDKC:CU:LDEV: The LDKC:CU:LDEV number of the LDEVs created in the external volume.
Emulation Type: The emulation type of the external volume set when it was mapped.
Capacity: Capacity of the external volume. When the emulation type of the mapped
external volume is for the open system, the capacity is shown in Blocks. When the
emulation type of the mapped external volume is for the mainframe system, the capacity
is shown in Cylinder.
Close button
Closes the LDEV Information dialog box.

Mapping Path Information Dialog Box

The Mapping Path Information dialog box shows the information on the mapping paths that connect
the internal volume and the external volume.
Figure 36 Mapping Path Information Dialog Box
The Mapping Path Information dialog box consists of:
List
Priority: Priority of the mapping path. 1 indicates the mapping path with the highest
priority.
Port: The port number in the local storage system connecting to the external storage
system.
WWN: Identification number of the port in the external storage system.
LUN: LU number set to the external volume.
Status: Status of the mapping path.
terms that are displayed on the Mapping Path Information dialog box. For required actions
for each path status, see
Close button
Closes the Mapping Path Information dialog box.
Pop-up menu
The Mapping Path Information dialog box does not have a pop-up menu that can be displayed.
82
Performing XP External Storage Operations
Table 12 (page 83)
"Mapping Path Statuses and Required Actions" (page
lists and describes the status
HP Confidential
122).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks xp20000

Table of Contents