Example: How To Map Ldevs Automatically - HP StorageWorks XP24000 User Manual

SSID (0004–FFFE): Select the SSID from the SSID list. You can select the value for an SSID from
0x0004 to 0xFFFE.
◦
If you have selected the SLPR Limited check box on the SSID dialog box, only the SSIDs
that can be used in SLPR selected on the SSID dialog box appear in the list.
◦
If you have not selected the SLPR Limited check box on the SSID dialog box, all of the
unused SSIDs appear in the list regardless of the selected SLPR.

Example: How to Map LDEVs Automatically

For instance, you map two external volumes that have the same emulation type, and create two
LDEVs in each external volume.
To assign the number which starts 00:01:01 with 255 intervals to total four LDEVs that you created:
1. Select the two external volumes and right-click them in the Add Volume dialog box, and then
click the LDEV Mapping (Auto) in the pop-up menu.
The LDEV Mapping (Auto) dialog box opens.
2. Configure the starting LDEV number and interval as follows:
LDKC: 00
CU: 01
Interval: 255
LDEV map: Select the cell in the row 1 and column 00.
3. Click OK.
LDEV numbers are automatically assigned as follows:
The first LDEV: 00:01:01
The second LDEV: 00:02:01
The third LDEV: 00:03:01
The fourth LDEV: 00:04:01
However, the Add Volume dialog box shows only the LDEV number assigned for the first LDEV
of each external volume. In this case, 00:01:01... and 00:03:01... appear in the Add Volume
dialog box.
Example: How to Map LDEVs Manually
This example shows how to map two external volumes that have the same emulation type, and
create two LDEVs in each external volume.
To assign the desired number to total four LDEVs that you created:
1. Select the two external volumes and right-click them in the Add Volume dialog box, and then
click the LDEV Mapping (Manual) in the pop-up menu.
The LDEV Mapping (Manual) dialog box opens.
2. Click the LDEV to which you want to assign an LDEV number in the LDKC:CU:LDEV column on
the left of the LDEV Mapping (Manual) dialog box.
3. Select the desired LDKC number and the desired CU number to the specified LDEV from the
list on the right of the LDEV Mapping (Manual) dialog box.
4. Click the cell of the desired LDEV number in the LDEV map on the right of the LDEV Mapping
(Manual) dialog box (see
The selected cell turns blue and the assigned LDEV number appears in the LDKC:CU:LDEV
column.
HP Confidential
Figure 30 (page 74)).
Mapping an External Volume Manually 73