HP StorageWorks XP24000 User Manual page 103

Table 20 AddVolumeSetting Tag Parameters (continued)
Layer
Second layer
Third layer
HP Confidential
Column in Parameter
Spreadsheet
H Emulation
I CacheMode
J InflowControl
A +
B Port
C WWN
A +
B +
C LDKC
D CU
E LDEV
Setting Range of Values
Emulation type of N/A
the external
volume. Write the
same characters
as the emulation
type shown in
"LDEV Capacity
Information for
Each Emulation
Type" (page 149).
Enable: Sets Enable
cache mode
Disable
to Enable.
Disable: Sets
cache mode
to Disable.
Enable: Sets Enable
inflow control
Disable
to Enable.
Disable: Sets
inflow control
to Disable.
Information about alternate paths. Specify the paths in the
order of descending priorities.
Identifier N/A
Port number of 1A to GR
the alternate path
WWN of the 0000000000000000
alternate path
to
FFFFFFFFFFFFFFFF
Information about LDEVs to be created in an external
volume
Identifier N/A
LDKC number 00 to 01
CU number 00 to FE
LDEV number. 00 to FF
Specify an LDEV
number that is not
assigned to any
volume. An
unassigned LDEV
number cannot
be specified if
other LDEVs in
the same area
grouped by 32
LDEV numbers
are already
Mapping External Volumes 103
Number of
Characters
16 characters or
fewer in ASCII
format
N/A
N/A
N/A
2 digits or fewer
16 hexadecimal
digits
N/A
2 hexadecimal
digits or fewer
2 hexadecimal
digits or fewer
2 hexadecimal
digits or fewer