STEP 6:
1. Attach the SEAT(10) to the SEAT CARRIAGE(60) with ROUND HEAD
BOLTS(M6x1x15mm)(58) and WASHERS(M6)(59).
STEP 7:
1. Slide the SEAT ASSEMBLY(10, 60) onto the CENTER BEAM(1).
2. Insert the SCREW ROD(34) through the CENTER BEAM(1) and screw the SEAT
STOPPERS(40) onto both ends of the SCREW ROD(34).
STEP 8:
1. Press the CENTER BEAM CAP(11) into the back end of the CENTER BEAM(1).
ROWER 305
10