Miele DGC 6660 Operating And Installation Instructions page 161

Problem
F55
F196
and other fault codes
F
Cause and remedy
The maximum operating time for a cooking function
has been exceeded. This has triggered the safety
switch off device.
 Switch the steam oven off and then back on again.
The steam oven is immediately ready for use again.
There is a fault.
 Switch the steam oven off and then back on again.
The filter in the bottom of the oven is not positioned
correctly.
 Switch the steam oven off.
 Insert the filter correctly:
 Switch the steam oven back on again.
 If, having corrected the problem, this fault
message appears again, contact Miele Service.
Technical fault.
 Switch the appliance off and contact Miele.
Problem solving guide
161