Table of Contents
Advertisement
Page 16 - Quick Reference
Diverting Calls
Setting a divert number switches its use on. Clearing the divert number switches it off.
Divert all:
To Set: Press
DIVERT ALL is displayed on the terminal
To Clear: Press
Divert on busy:
To Set: Press
To Clear: Press
Divert on no answer:
To set the time-out period see "Ringer Timeout" on page 15.
To Set: Press
To Clear: Press
No Calls on/off:
Switching No Calls on stops all calls. Callers hear continuous tone or are diverted to
the Divert All number (if set).
To switch No Call on/off: Press
Other Features
Enter/exit group:
To Enter: Press
To Exit: Press
To make a page call: Press
To set/change a passcode: Press
Forced Account/PIN Code entry:
A repeating single-pip when making an external call may indicate that you must dial an
account or PIN code before continuing (check with your System manager). If you make
a mistake, dial ∗ and try again.
To pickup any ringing phone: Press
To pickup ringing phones in a group: Press R, # to pickup the longest ringing call.
To set a phone's pickup group: Press
Broken dial tone: Dial 4, 2
Loud pip: <pass>, you will hear either:
Continuous tone: <pass> wrong,
Three soft tones: Pickup group set. Press ∗ to cancel
Single soft tone: Dial group number, #,
To set/alter a Personal Alarm: Press
(where hhmm is the time in 24hr clock format.
To clear a Personal Alarm:
38DHB0002UKCW - Issue 5 (12/00)
, ∗, 0 , 1, 0, <pass>, ∗, <extension no.>, #
, ∗, 0 , 1, 0, <pass>, ∗
, ∗, 0 1, 1, <pass>, ∗, <extension no.>, #
, ∗, 0 1, 1, <pass>, ∗
, ∗, 0, 1, 2, <pass>, ∗, <extension no.>, #
, ∗, 0, 1, 2, <pass>, ∗
, ∗, 0, 6 plus 0 (on) or 1 (off)
, ∗, 0, 4, 0
, ∗, 0, 4, 1
, ∗, 7, <group number or extension>, speak,
, ∗, 8, ∗, #
, ∗, 0, 7, 0, <pass>, ∗, <new pass>,
9.
,
∗, 0.
,
, ∗, 8, hhmm, # .
INDeX DECT 20DT Handset User's Guide
Advertisement
Table of Contents
