Switching Between Systems; Removing A Subscription - Avaya INDeX 9.1 20DT User Manual

Switching Between Systems

If the phone has been subscribed to several systems, you must select which system to
currently use.
1. Press MENU and then > until LOGIN appears, then press .
2. SELECT LOGIN appears, press .
3. Press > until required SYSTEM ID number appears.
•
4. When the required ID is shown, press .
5. CREATE SYSTEM 1-4 appears. Press > until required SYSTEM appears.
6. AC: _ _ _ _ _ _ also appears. If required, enter an Account Code and/or press .
7. SUBSCRIPTION WAIT appears. If for some reason your handset cannot subscribe
it displays FAILED. Press
8. When successfully subscribed, your handset bleeps and INDeX XXXX is displayed
(where XXXX is your handset number).

Removing a Subscription

If necessary, you can remove a subscription from the handset.
DO NOT DO THIS LIGHTLY as you may not be able to re-subscribe without assistance
from your System Maintainer.
1. Press MENU and then > until LOGIN appears, then press .
2. SELECT LOGIN appears.
3. Press > until required SUBSCRIPTION REMOVE appears, then press .
4. Enter your password and press .
5. SUBSCRIPTION REMOVE appears, press
you wish to remove appears
6. Press
•
7. Press MENU to finish.
INDeX DECT 20DT Handset User's Guide
The handset displays the ID's of any systems in range. If there are several
systems locally, use < and > to display the different ID numbers found.
again to remove the system.
If the system removed was the one currently in use, you need to LOGIN to
another system (see "Switching Between Systems" on page 11).
to try again or press MENU to stop.
and then press > until the system
Subscribing - Page 11
38DHB0002UKCW - Issue 5 (12/00)