Set Mode - Icom IC-746PRO Instruction Manual

D Auto repeater function
This function automatically activates the repeater set-
tings (DUP– or DUP+ and/or tone encoder ON/OFF)
when the operating frequency falls within the general
repeater output frequency range and deactivates them
when outside of the range.
Set the auto repeater function ON-1 or ON-2 in set
mode in advance (p. 83). When set ON-1 or ON-2, re-
peater settings are automatically activated according
to the table below.
ON-1 automatically set the duplex setting and ON-2
automatically sets the duplex setting and tone encoder
automatically.
• Frequency range and offset direction
FREQUENCY RANGE
145.200–145.495 MHz
146.610–146.995 MHz
147.000–147.395 MHz
DUPLEX DIRECTION
minus duplex
minus duplex
plus duplex
RECEIVE AND TRANSMIT
A u t o R e p e a t e r
1 8
A u t o R e p e a t e r
1 8
A u t o R e p e a t e r
1 8
4
O N - 1
O N - 2
O F F
46