Greasing The Boom Hinges - Toro 41582 Operator's Manual

Figure 32
Three inside each front wheel
1. Grease point
Figure 33
One on each side of the centering arm, between the tank
and the engine compartment
1. Grease point
Pump (Do not over grease)
1. Grease point

Greasing the Boom Hinges

Important: If the boom hinge is washed with
water, all water and debris must be cleared from the
hinge assembly and fresh grease must be applied.
Grease Type: No. 2 general-purpose lithium base grease.
1. Wipe the grease fittings clean so that foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing at each
fitting Figure 35.
1. Grease fitting
33
Figure 34
Figure 35
Right boom