Lubrication; Greasing The Sprayer - Toro 41582 Operator's Manual

Figure 31
1. Rear jacking point (2)

Lubrication

Greasing the Sprayer

Service Interval: Every 50 hours
Lubricate all bearings and bushings after every 50
operating hours or once a year, whichever occurs first.
Grease Type: No. 2 general-purpose lithium base grease.
Toro Premium All Purpose Grease is available from you
Toro Distributor.
1. Wipe the grease fitting clean so that foreign matter
cannot be forced into the bearing or bushing.
2. Pump grease into the bearing or bushing.
3. Wipe off excess grease.
The grease fittings positions are illustrated by the
following: Figure 32 through Figure 34.
32