Drive System Maintenance; Check The Tire Pressure; Inspecting The Wheels/Tires; Changing The Planetary Gearbox Fluid - Toro 41582 Operator's Manual

Drive System
Maintenance

Check the Tire Pressure

Service Interval: Before each use or daily
Check the tire pressure every 8 hours or daily to ensure
proper levels. Fill the tires to 18 psi (124 kPa). Also,
check the tires for wear or damage.

Inspecting the Wheels/Tires

Service Interval: After the first 8 hours
Every 100 hours
Every 100 hours
After the first 200 hours
Every 400 hours
Yearly
Check the wheels to ensure that they are mounted
securely after the first 8 operating hours and then every
100 hours thereafter. Torque the front lug nuts to 55-75
ft-lb (75-102 N⋅m) and the rear lug nuts to 75-90 ft-lb
(95-122 N⋅m).
Check the tire condition at least every 100 hours
of operation. Operating accidents, such as hitting
curbs, can damage a tire or rim and also disrupt wheel
alignment, so inspect tire condition after an accident.
Changing the Planetary
Gearbox Fluid
Service Interval: After the first 8 hours
Every 400 hours
Change the planetary gearbox fluid in each rear wheel
after the first 8 hours and then after every 400 hours
thereafter.
Use high quality, SAE 85W-140 weight gear lube.
1. Position the sprayer on a level surface with the
rear wheels positioned for draining as illustrated in
Figure 48.
1. Drain plugs, positioned for draining
2. Set the parking brake, stop the pump, stop the
engine, and remove the ignition key.
3. Place a pan under the drain plugs and remove them
from the wheel (Figure 48).
4. Place a pan under the inner drain plug and remove
it (Figure 49).
1
1. Inner drain plug
5. Move the vehicle slowly until the wheel is positioned
for filling as illustrated in Figure 50
42
Figure 48
G002246
Figure 49