Daily Maintenance Checklist - Toro 41582 Operator's Manual

Maintenance Service
Interval
Yearly
Important: Refer to your engine Operator's Manual for additional maintenance procedures.

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the brake and parking brake
operation.
Check the neutral lockout switch operation.
Check the fuel level.
Check the engine oil level.
Check the hydraulic oil level.
Check the coolant level.
Inspect the air filter.
Inspect the radiator and oil cooler for
debris.
Check any unusual engine noises.
Check any unusual operating noises.
Check the tire pressure.
Check for fluid leaks.
Check all hydraulic and fluid hoses for
damage, kinks, or wear.
Check the instrument operation.
Check the accelerator operation.
Clean the suction strainer.
Lubricate all grease fittings.
Touch up and damaged paint.
1 Immediately after every washing, regardless of the interval listed
Maintenance Procedure
• Inspect the nylon pivot bushings.
• Grease the actuator rod bearings.
• Complete all yearly maintenance procedure specified in the engine operator's
manual.
• Drain and clean the fuel tank.
• Check the fuel lines and connections.
• Pack the front wheel bearings.
• Check the coolant (as directed by the manufacturer) and change if necessary.
• Replace the hydraulic oil filter.
• Change the hydraulic oil.
• Inspect the O-rings in the valve assemblies and replace them if necessary.
• Inspect the pump diaphragm and replace if necessary (see an Authorized Toro
Service Distributor).
• Inspect the pressure dampener bladder and replace if necessary (see an Authorized
Toro Service Distributor).
• Inspect the pump check valves and replace if necessary (see an Authorized Toro
Service Distributor).
• Inspect the nylon pivot bushings.
For the week of:
Mon.
1
Tues. Wed. Thurs.
30
Fri. Sat. Sun.