Ftp/Https Access Data - Siemens HiPath 3000 Administration Manual

3.8.8.1

FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see section 3.8.2, "Common FTP Settings") are to
be used, Use default must be set to "Yes", and only the Filename must be specified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No".
• Filename: Specifies the file name of the ringtone file.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
• Server: IP address or hostname of the FTP/HTTPS server in use.
• Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
• Account: Account at the server (if applicable).
• Username: User name for accessing the server.
• Password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to "HTTPS".
Administration via WBM
File transfer > Ringer file
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
Transferring Phone Software, Application and Media Files
administration.fm
Administration
3-69