Screensaver; Ftp/Https Access Data - Siemens HiPath 3000 Administration Manual

3.8.7

Screensaver

The screensaver is displayed when the phone is in idle mode. It performs a slide show consist-
ing of images which can be uploaded using the web interface.
Screensavers are available only on OpenStage 60/80 phones.
>
The file size for a screensaver image is limited to 300 KB.
>
For screensaver images, the following specifications are valid:
• Data format: JPG or PNG. JPG is recommended.
• Screen format: 4:3. The images are resized to fit in the screen, so that images with a width/
height ratio differing from 4:3 will appear with deviant proportions.
• Resolution: The phone's screen resolution is the best choice for image resolution:
• OpenStage 60: 320x240
• OpenStage 80: 640x480
3.8.7.1

FTP/HTTPS Access Data

If the default FTP/HTTPS access settings (see section 3.8.2, "Common FTP Settings") are to
be used, Use default must be set to "Yes", and only the Filename must be specified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used.
Value range: "Yes", "No".
• Filename: Specifies the file name of the image file.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: "FTP", "HTTPS".
Default: "FTP".
• Server: IP address or hostname of the FTP/HTTPS server in use.
• Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
• Account: Account at the server (if applicable).
• Username: User name for accessing the server.
• Password: Password corresponding to the user name.
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual
Transferring Phone Software, Application and Media Files
administration.fm
Administration
3-65