Automatic Vlan Discovery Using Lldp-Med (V2) - Siemens HiPath 3000 Administration Manual

administration.fm
Administration
LAN Settings
Administration via Local Phone (V2)
To enable VLAN discovery by DHCP, select DHCP used in the Discovery mode menu.
|
--- Administration
|
--- Network
|
--- IP Configuration
|
--- Discovery mode
3.2.2.2

Automatic VLAN discovery using LLDP-MED (V2)

This is the default setting. The VLAN ID is configured by the network switch using LLDP-MED
(Link Layer Discovery Protocol-Media Endpoint Discovery). If the switch provides an appropri-
ate TLV (Type-Length-Value) element containing the VLAN ID, this VLAN ID will be used. If no
appropriate TLV is received, DHCP will be used for VLAN discovery.
Administration via WBM
Network > IP configuration
First, click on change mode. Afterwards, the IP configuration mode dialog opens.
A31003-S2010-M100-18-76A9
3-10
OpenStage HFA Family, Administration Manual