Siemens HiPath 3000 Administration Manual page 48

administration.fm
Administration
Access via Local Phone
OpenStage 60/80
If a parameter is set by entering a number or character data, the onscreen keypad is used.
i
i
Press the
numbers or the Sensor Wheel for selecting numbers, characters, or groups of characters.
h
The key deletes one character in the input field, and the
OK field.
The following figure describes the elements of the onscreen keypad and their functions:
Additionally, you can use the following keys on the keypad as shortcuts for the selection of
character groups:
Element Function
*
Switch to punctuation and special characters.
#
Toggle between lowercase characters, uppercase characters, and digits.
OpenStage 15/20/40
With the OpenStage 20/40, use the keypad for entering parameters. With the 3 way/5 way-
Navigator, you can enter, delete, copy and paste characters and numbers as well as navi-
gate within an entry and toggle the input mode.Save and exit
6. Save end exit
When you are done, select Save & exit and press
3-4
key to enter the number editor. Within the number editor, solely use the key
Element with focus
Letters, digits, punctuation marks or special characters
Confirm
Cancel
Insert clipboard contents at cursor position
Copy contents of active field to clipboard
Move cursor left/right
Shift to punctuation and special characters
Shift to numeric entry Shift to punctuation and special charac-
Shift to upper/lower case Shift to upper/lower case
g
key moves the cursor to the
i
.
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual