Phone Software; Ftp/Https Access Data - Siemens OpenStage 20 Administration

3.9.3

Phone Software

The firmware for the phone can be updated by downloading a new software file to the phone.
Do not disconnect the phone from the LAN or power unit during software update. An
7
active update process is indicated by blinking LEDs and/or in the display.
3.9.3.1

FTP/HTTPS Access Data

If the default FTP/HTTPS Access settings (see Section 3.9.2, "Common FTP/HTTPS Settings")
are to be used, Use default must be set to „Yes", and only the Filename must be specified.
Data required (in every case)
• Use default: Specifies whether the default FTP/HTTPS access settings shall be used. Val-
ue range: „Yes", „No".
Default: „No".
• Filename: Specifies the file name of the phone software.
Data required (if not derived from Defaults)
• Download method: Selects the protocol to be used.
Value range: „FTP", „HTTPS".
Default: „FTP".
• Server address: IP address or hostname of the FTP/HTTPS server in use.
• Server port: Port number of the FTP/HTTPS server in use.
Default: 21.
• FTP account: Account at the server (if applicable).
• FTP username: User name for accessing the server.
• FTP password: Password corresponding to the user name.
• FTP path: Path of the directory containing the files.
• HTTPS base URL: IP address or hostname of the HTTPS server in use; only applicable if
Download method is switched to „HTTPS".
A31003-O1010-M100-3-76A9, 12/09/2007
HiPath 8000 - OpenStage Family, Administrator Manual
Transferring Phone Software, Application and Media Files
administration.fm
Administration
3-71