Phone Canonical Settings - Siemens HiPath 3000 Administration Manual

administration.fm
Administration
Corporate Phonebook: Directory Settings
3.9.2.3

Phone Canonical Settings

For contact data retrieval from the directory server, upon arrival of a call, the remote telephone
number is converted according to the canonical dial settings (see also section 3.6.1, "Canonical
Dialing Configuration"). The format of the resulting number should match the format the num-
bers are stored in the directory server. It is recommended to convert the numbers to fully qual-
ified format, i.e. adding country and area code to the subscriber number. This way it is ensured
that the number used for lookup is unique.
Below is an example of settings for a company in Munich.
Administration via WBM
Local functions > Locality > Canonical dial settings
Canonical dial settings
Local country code
National prefix digit
Local national code
Minimum local number length
Local enterprise node
PSTN access code
International access code
Operator codes
Emergency numbers
Initial extension digits
Submit
|
--- Administration
|
--- Local Functions
|
--- Locality
|
--- Canonical dial settings
|--- Local country code
|--- National prefix digit
|--- Local national code
|--- Minimum local number length
|--- Local enterprise node
|--- PSTN access code
|--- International access code
|--- Operator code
|--- Emergency number
|--- Inital extension digits
3-80
49
0
89
5
8008
0
00
1,2,3,4,5,6,7,8,9
Reset
A31003-S2010-M100-18-76A9
OpenStage HFA Family, Administration Manual