General Features; Specifications - CADDY PF01302 Installation And Operating Instructions Manual

Table of Contents

Advertisement

3. GENERAL FEATURES

Maximum log length
Diameter of the flue collar
Recommended connector pipe diameter
Recommended chimney diameter
Required type of chimney
Baffle material
Alcove installation
Mobile home installation
Shipping weight (without option)
Blower (wood or wood/electric options only)
Filter – dimensions (Width x Depth x Height)
(included with optional blower assembly)
Filter – quantity
Particulate emission standard
USA standard (safety)
Canadian standard (safety)
** East-west: through the door you see the longitudinal sides of the logs; north-south: through the door you see the tips of the logs.
Mobile home (Canada) or manufactured home (USA): The US department of Housing and Urban Development describes
"manufactured homes" better known as "mobile homes" as followed; buildings built on fixed wheels and those transported on
temporary wheels/axles and set on a permanent foundation. In Canada, a mobile home is a dwelling for which the manufacture and
assembly of each component is completed or substantially completed prior to being moved to a site for installation on a foundation
and connection to service facilities and which conforms to the CAN/CSA-Z240 MH standard.

4. SPECIFICATIONS

Color
Thermostatic control
Door type
Glass type
Air return plenum – dimensions (Depth or Height)
Air return plenum – dimension (Width)
Hot air plenum – dimensions (Depth or Height)
Hot air plenum – dimension (Width)
Ash pan – dimensions (Width x Depth x Height)
Clearance – front
Clearance – back wall
Clearance – side wall
Clearance – opposite side wall
Clearances – ducts
Clearance – recommended for maintenance on
option side
Electric element – location
Electric element – clearance recommended for
maintenance
Electric element (maximum output)
Top cold air plenum option – material
Top cold air plenum option – dimensions (Width x
Depth x Height)
Top cold air plenum option – smoke pipe diameter
Tested and listed as per applicable standards
Warranty
6
20 in (508 mm)
/ north-south*
6 in (152 mm)
6 in (152 mm) (wood only or combined wood-electric)
6 in (152 mm) (wood only or combined wood-electric)
CAN/ULC S629, UL 103 HT (2100 °F)
C-Cast
Not approved
Not approved
470 lb (213 kg)
1/4 HP, direct drive, 4 speeds,
15 in x 20 in x 1 in (381 mm x 508 mm x 25 mm)
1
EPA / CSA B415.1-10
UL 391, UL 1995
CSA B366.1, CSA C22.2 no 236
Grey
Yes
Single, glass with cast iron frame
Ceramic glass
16 7/8 in
20 1/4 in
20 in
20 in
11 ¾ in x 12 in x 2 5/8 in
48 in
24 in from the blower housing recommended service clearance
8 in without options installed
24 in
3 in for the first 6 feet and 0 in after
24 in
Left or right
24 in
11.25 kW
Galvanized steel
20 ½ in x 16 15/16 in x 14 1/16 in
6 in
By an accredited laboratory (CAN/USA)
Limited lifetime
1,400
CFM

Advertisement

Table of Contents
loading

Table of Contents