Alternate Electrical Connection For Multi-Speed Pump Without A Controller Or Time Clock - Paramount Fitness ClearO3 Installation Manual

ALTERNATE ELECTRICAL CONNECTION FOR MULTI-SPEED
PUMP WITHOUT A CONTROLLER OR TIME CLOCK
Some variable and multi speed pumps have a built in controller. This requires the ClearO3 to have its own
controlling device. A common method in this type of instillation is to use a flow switch.
Paramount has available an add-on paddle flow switch (Paramount part# 004-402-0010-00 or Grid Controls part #
57-F1-225-00W). The power is run through this switch and then to the ClearO3. The flow switch is plumbed in the
main line of the pool return. When it senses flow the ClearO3 is turned on.
Fig. 6
breaker panel
flow switch
The ClearO3 should be wired to run with the filter pump which creates the air draw through the
unit needed to create ozone. Do not set the ClearO3 to run when the filter pump is off.
7
Clear03
steel tight flex
conduit