Paramount Fitness ClearO3 Installation Manual page 15

REPLACING UV BULB
DO NOT TOUCH THE GLASS, HANDLE BY CERAMIC ENDS OF BULB
Turn the power off to filtration system pump at
circuit breaker. Remove three screws in left end
side cap labeled "electrical connections".
Remove plug from light bulb.
Remove and throw away the old gasket. Make sure
new gasket is in place on replacement bulb. Align
with key and slide into hole until bulb is completely
into unit.
Check glow tube on the left front of the Clear O3. A light blue light indicates lamp is lit and the
unit is producing ozone.
Replace
old gasket
Remove side cap. Grasp light bulb plug and pull
light out about one inch.
Pull light bulb free from Clear O3 unit.
Press plug onto light bulb. Replace side cap and
three screws. Turn on power to filtration system
pump.
15