Sound Pressure; Sound Power; Vibration Level For Model 74534Te; Vibration Level For Model 74536Te - Toro 74534TE GrandStand Operator's Manual

Slope Operation
All slopes and ramps require extra caution. If you feel uneasy
on a slope, do not mow it.
•
Remove obstacles such as rocks, tree limbs, etc. from the
mowing area.
•
Watch for holes, ruts or bumps. Tall grass can hide
obstacles.
•
Use caution near drop-offs, ditches, or embankments.
The machine could suddenly turn over if a wheel goes
over the edge of a cliff or ditch, or if an edge caves in.
•
Use extra care with grass catchers or other attachments.
These can change the stability of the machine.
•
Keep all movement on slopes slow and gradual.
•
Do not make sudden changes in speed or direction.
•
Mow slopes side to side.
•
Do not mow slopes greater than 15 degrees.
Service
•
Do not store the machine or a fuel container inside where
there is an open flame, such as near a water heater or
furnace.
•
Keep the nuts and bolts tight, especially the
blade-attachment bolts.
•
Never remove or tamper with safety devices. Check their
proper operation regularly. Never do anything to interfere
with the intended function of a safety device or to reduce
the protection provided by a safety device.
•
To best protect your investment and maintain optimal
performance of your Toro equipment, count on Toro
genuine parts. When it comes to reliability, Toro delivers
replacement parts designed to the exact engineering
specifications of our equipment. For peace of mind, insist
on Toro genuine parts.
•
Check brake operation frequently. Adjust and service as
required.

Sound Pressure

Model 74534TE has a sound pressure level at the operator's
ear of 88 dBA, which includes an Uncertainty Value (K) of
1 dBA.
Model 74536TE has a sound pressure level at the operator's
ear of 86 dBA, which includes an Uncertainty Value (K) of
1 dBA.
The sound pressure level was determined according to the
procedures outlined in EN ISO 5395:2013.

Sound Power

Model 74534TE has a guaranteed sound power level of 100
dBA, which includes an Uncertainty Value (K) of 1 dBA.
Model 74536TE has a guaranteed sound power level of 100
dBA, which includes an Uncertainty Value (K) of 1 dBA.
The sound power level was determined according to the
procedures outlined in ISO 11094.
Vibration Level for Model
74534TE
Hand-Arm
Measured vibration level for right hand = 0.8 m/s
Measured vibration level for left hand = 0.6 m/s
Uncertainty Value (K) = 0.4 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.79 m/s
Uncertainty Value (K) = 0.39 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Vibration Level for Model
74536TE
Hand-Arm
Measured vibration level for right hand = 1.1 m/s
Measured vibration level for left hand = 1.1 m/s
Uncertainty Value (K) = 0.6 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.79 m/s
Uncertainty Value (K) = 0.39 m/s
Measured values were determined according to the procedures
outlined in EN ISO 5395:2013.
6
2
2
2
2
2
2
2
2
2
2