Sound Pressure; Sound Power; Vibration Level - Toro Z Master Professional 6000 Series Operator's Manual

Hide thumbs Also See for Z Master Professional 6000 Series:
Table of Contents

Advertisement

Slope Operation
Do not mow slopes greater than 15 degrees.
Do not mow near drop-offs, ditches, steep banks,
or water. Wheels dropping over edges can cause
rollovers, which may result in serious injury, death,
or drowning.
Do not mow slopes when grass is wet. Slippery
conditions reduce traction and could cause sliding
and a loss of control.
Do not make sudden turns or rapid speed changes.
Use a walk behind mower and/or a hand trimmer
near drop-offs, ditches, steep banks, or water.
Reduce speed and use extreme caution on slopes.
Remove or mark obstacles such as rocks, tree
limbs, etc. from the mowing area. Tall grass can
hide obstacles.
Watch for ditches, holes, rocks, dips, and rises
that change the operating angle, as rough terrain
could overturn the machine.
Avoid sudden starts when mowing uphill, because
the mower may tip backward.
Be aware that loss of traction may occur going
downhill. Weight transfer to the front wheels
may cause drive wheels to slip and cause loss of
braking and steering.
Always avoid sudden starting or stopping on a
slope. If tires lose traction, disengage the blades
and proceed slowly off the slope.
Follow the manufacturer's recommendations
for wheel weights or counterweights to improve
stability.
Use extreme care with grass catchers or other
attachments. These can change the stability of the
machine and cause a loss of control.

Sound Pressure

This unit has a sound pressure level at the operator's
ear of 92 dBA, which includes an Uncertainty Value
(K) of 1 dBA.
The sound pressure level was determined according
to the procedures outlined in EN ISO 5395:2013.

Sound Power

This unit has a guaranteed sound power level of 105
dBA, which includes an Uncertainty Value (K) of 1
dBA.
The sound power level was determined according to
the procedures outlined in ISO 11094.

Vibration Level

Hand-Arm
Measured vibration level for right hand = 1.9 m/s
Measured vibration level for left hand = 1.5 m/s
Uncertainty Value (K) = 1.0 m/s
Measured values were determined according to the
procedures outlined in EN ISO 5395:2013.
Whole Body
Measured vibration level = 0.62 m/s
Uncertainty Value (K) = 0.31 m/s
Measured values were determined according to the
procedures outlined in EN ISO 5395:2013.
6
2
2
2
2
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

74902te

Table of Contents