Figure 35
1. Remove battery
2. With 2 people, lift the front
end of the mower (ensure
that the platform is up).
Releasing the Cushion for
Rear Access
You can release the cushion for rear access to the machine for
maintenance or adjustment.
1. Lower the platform.
2. Remove the hairpin cotters on each side of the cushion.
3. Slide the large washers with plastic bushings to the
inside.
4. Remove the cushion and lower it to the platform.
5. Perform any maintenance or adjustment on the
machine.
6. Raise the cushion and slide it onto the pins on both
sides of the machine
7. Slide the large washers with plastic bushings into the
cushion bracket and secure them with a hairpin-cotter
pin
(Figure
36).
31
(Figure
36).
Figure 36