Operating The Mower-Blade-Control Switch (Pto); Operating The Throttle - Toro 74534TE GrandStand Operator's Manual

Operating the
Mower-Blade-Control Switch
(PTO)
The blade-control switch (PTO) is used in conjunction with
the right motion-control lever to engage and disengage the
mower blades.
Engaging the Mower Blades (PTO)
1. To engage the mower blades, move the right
motion-control lever to the center, unlocked position.
2. Pull the blade-control switch (PTO) up and release it
while holding down the right motion-control lever in
the center, unlocked position.
Disengaging the Mower Blades (PTO)
The following are 2 options for disengaging the mower blades:
•
Push the blade-control switch (PTO) down to the O
position (Figure 10).
•
Move the motion-control levers to N
the right motion-control lever into the N
position (Figure 11).
g012781
Figure 9
g012782
Figure 10
and move
EUTRAL
EUTRAL

Operating the Throttle

The throttle control moves between F
(Figure 12).
Always use the F
blades with the blade-control switch (PTO).
FF
-
LOCK
17
g012895
Figure 11
and S
AST
position when engaging the mower
AST
G008946
Figure 12
positions
LOW