Specifications - Toro 74534TE GrandStand Operator's Manual

With 91cm or 102cm turbo force cutting unit
Hide thumbs Also See for 74534TE GrandStand:
Table of Contents

Advertisement

Fuel Gauge
The fuel gauge is located on the top, middle of the tank
(Figure
5).
Safety-interlock Indicators
There are symbols on the hour meter and indicate with a
black triangle that the interlock component is in the correct
position
(Figure
6).
Battery-indicator Light
If the ignition key is turned to the O
seconds, the battery voltage be displays in the area where the
hours are normally displayed.
The battery light turns on when the ignition is turned on and
when the charge is below the correct operating level
6).
Throttle Control
The throttle control is variable between the F
positions.
Choke
Use the choke to start a cold engine.
Blade-Control Switch (PTO)
Use the blade-control switch (PTO) to engage the electric
clutch to drive the mower blades with either motion-control
lever in the center, unlocked position
switch up to engage the blades and release. To disengage the
blades, push the blade-control switch (PTO) down, or move
or release the motion-control levers into the N
position.
Ignition Switch
Use the ignition switch to start the mower engine
The switch has 3 positions: O
Motion-control Levers
The motion-control levers are used to drive the machine
forward, reverse, and turn either direction.
Fuel-Shutoff Valve
Close the fuel-shutoff valve (located behind the operator
cushion on the right hand side of fuel tank) when transporting
or storing the mower.
position for a few
N
(Figure
and S
AST
LOW
(Figure
5). Pull the
-
EUTRAL
LOCK
(Figure
, R
, and S
.
FF
UN
TART
Attachments/Accessories
A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.

Specifications

Note: Specifications and design are subject to change
without notice.
Model 74534TE
Cutting width
Width with deflector down
Length with platform down
Length with platform up
Height
Weight
Model 74536TE
Cutting width
Width with deflector down
Length with platform down
Length with platform up
Height
Weight
5).
14
91 cm (36 inches)
131 cm (52 inches)
188 cm (74 inches)
155 cm (61 inches)
122 cm (48 inches)
343 kg (756 lb)
102 cm (40 inches)
142 cm (56 inches)
178 cm (70 inches)
145 cm (57 inches)
122 cm (48 inches)
351 kg (773 lb)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

74536te grandstand

Table of Contents