Pre-Maintenance Procedures; Releasing The Cushion For Rear Access; Opening The Engine Guard And Guard Extension - Toro 72542TE Operator's Manual

Pre-Maintenance
Procedures
Releasing the Cushion for
Rear Access
You can release the cushion for rear access to the
machine for maintenance or adjustment.
1. Lower the platform.
2. Loosen the twist knobs on each side of the
machine (Figure
Figure 28
1. Twist knob
3. Remove the cushion and lower it to the platform.
4. Perform any maintenance or adjustment on the
machine.
5. Raise the cushion, and slide it onto the pins on
both sides of the machine.
6. Tighten the twist knobs.
28).
2. Cushion
Opening the Engine Guard
and Guard Extension
1. Remove the bolt and shoulder nut securing the
engine guard to the guard extension
g032556
1. Bolt and shoulder nut
2. Rotate the engine guard forward as shown in
Figure 30.
26
(Figure
Figure 29
2. Engine guard
Figure 30
29).
g279539
g279542