Adjusting The Play In The Gas Bowden Cable - KTM 690 SMC Owner's Manual

Hide thumbs Also See for 690 SMC:
Table of Contents

Advertisement

MAINTENANCE WORK ON CHASSIS AND ENGINE

Adjusting the play in the gas Bowden cable

9.78
Danger
Danger of poisoning Exhaust gases are poisonous and can result in
unconsciousness and/or death.
When running the engine, always make sure there is sufficient ventilation,
and do not start or run the engine in a closed space without an effective
exhaust extraction system.
Start the engine and let it run idle. Move the handlebar to and fro over the entire steer-
ing range.
The idle speed must not change.
»
If the idle speed changes:
Adjust the play in the gas Bowden cable.
x
Move the handlebar to the straight-ahead position.
Use the KTM diagnostics tool to set the throttle stepper motor to the neutral position.
Loosen counter nut
Set the play in the gas Bowden cable by turning the adjusting screw
Guideline
Play in gas Bowden cable
Tighten counter nut
600631-10
.
3... 5 mm (0.12... 0.2 in)
.
x
(
p. 135)
.
135

Advertisement

Table of Contents
loading

Table of Contents