DataCard CP60 Service Manual page 157

Record the Printer Network Settings
1.
Press the Enter key on the display to enter the status menu.
2.
Repeatedly press the Enter key to scroll through the network settings and
record each one as it is displayed.
•
•
•
•
•
•
Removal Procedure
1.
Unplug the printer.
2.
Remove the ribbon cartridge and cleaning roller.
3.
Remove the
4.
Remove the
5.
Disconnect all cables from the control board.
6.
Lift the board out of the base.
7.
If the printer is equipped with the magnetic stripe option, remove the
Magnetic Stripe Circuit Board
8.
If the printer is equipped with a smart card option, remove the
Interface Board
CP60 and CP60 Plus Service Manual
Address Mode
Data Format
IP Address
Subnet Mask
Gateway Address
MAC Address
Main Enclosure
Transport Assembly
(p. 6-81) and the two standoffs from the main control board.
(p. 6-8).
from the base (p. 6-29).
(p. 6-75) from the main control board.
Smart Card
6-33